Woodturning for Woodturners by Paul Hannaby
21st October 2025 – 22nd October 2025 @ 9:30 am – 5:00 pm – A two day beginner’s course covering: Day 1 – safety, parts of the lathe, hand tools and sharpening, essential spindle turning techniques and a spindle turning project Day 2 – Turn a platter and then turn a bowl including grain orientation; effective chuck attachment; use of spindle and bowl gouge; sanding and finishing, ending with […]
21st October 2025 @ 9:30 am – 5:00 pm – A one day course covering all the basics needed to get started: Safety: Woodturning is not without its hazards and awareness of what can go wrong and adopting a safe approach will ensure you don’t come to any harm. Turning Tools And Terminology: The plethora of woodturning tools that confront a newcomer to the craft […]
22nd October 2025 @ 9:30 am – 5:00 pm – A one day course covering how to turn a platter and how to turn a bowl including ways to mount the blank on the lathe; effective chuck attachment; grain orientation; use of spindle and bowl gouges and choices for finishing. The 6 hours excludes breaks and the finish time is approximate.
4th November 2025 @ 9:30 am – 5:00 pm – A one day course covering all the basics needed to get started: Safety: Woodturning is not without its hazards and awareness of what can go wrong and adopting a safe approach will ensure you don’t come to any harm. Turning Tools And Terminology: The plethora of woodturning tools that confront a newcomer to the craft […]
8th November 2025 @ 9:30 am – 5:00 pm – A one day course covering how to turn a platter and how to turn a bowl including ways to mount the blank on the lathe; effective chuck attachment; grain orientation; use of spindle and bowl gouges and choices for finishing. The 6 hours excludes breaks and the finish time is approximate.
24th November 2025 @ 9:30 am – 4:30 pm –
Learn about all aspects of box making and try your hand at making a small end grain box with a push fit lid, followed by tuition on the ins and outs of thread chasing and make a threaded box.
12th December 2025 @ 9:30 am – 1:00 pm – A 3 hour (approx) course covering the basics of spindle turning and production of a simple project. Usual start time 9:30am and finish time around 12:30-1:00pm. Up to four people can be accommodated and I welcome group bookings.
13th December 2025 @ 9:30 am – 1:00 pm – A 3 hour (approx) course covering the basics of spindle turning and production of a simple project. Usual start time 9:30am and finish time around 12:30-1:00pm. Up to four people can be accommodated and I welcome group bookings.
11th January 2026 @ 9:30 am – 1:00 pm – A 3 hour (approx) course covering the basics of spindle turning and production of a simple project. Usual start time 9:30am and finish time around 12:30-1:00pm. Up to four people can be accommodated and I welcome group bookings.
13th January 2026 @ 9:30 am – 5:00 pm – A one day course covering all the basics needed to get started: Safety: Woodturning is not without its hazards and awareness of what can go wrong and adopting a safe approach will ensure you don’t come to any harm. Turning Tools And Terminology: The plethora of woodturning tools that confront a newcomer to the craft […]